INPRO International, Inc.

FTP STYLE INSTALLATION

FTP Installation Option

iSeries Side

1. Create Folder INPRO with CRTFLR FLR(INPRO) TEXT('INPRO Folder') AUT(*ALL) (all installations go through this one folder, so install only one product at a time, if it exists then delete/remove all objects/files from it)

PC Side

1. If you have OS/2 open an OS/2 window session or if you have MS Windows open a DOS window session at the command prompt key in the following:

   returned  --> [C:\]
   keyed in  --> ftp [as/400 ip address]  [enter]
   returned  --> Connected to xxxxx.
   returned  --> 220-QTCP at xxxxx.
   returned  --> 220 Connection will close if idle more than 5 minutes.
   returned  --> Name (xxxxx):
   keyed in  --> [enter your AS/400 user id] [enter]
   returned  --> 331 Enter password.
   returned  --> Password:
   keyed in  --> [enter your AS/400 password] [enter]
   returned  --> 230 xxxxxxxx logged on.
   returned  --> ftp>
   keyed in  --> bin [enter]
   keyed in  --> 200 Representation type is binary IMAGE.
   returned  --> ftp>
   keyed in  --> quote site namefmt 1 [enter] 
   returned  --> 250  Now using naming format "1".
   returned  --> ftp>
   keyed in  --> cd /QDLS/INPRO/ [enter]
   returned  --> 250 Current directory changed to /QDLS/INPRO. (remember one product at a time)
   returned  --> ftp>
   keyed in  --> lcd c:\inpro [enter]
   returned  --> Local directory now C:\INPRO (or whatever you called it)
   returned  --> ftp>
   keyed in  --> mput *.* (replace [enter]
   START:This section will loop until all files in the INPRO directory
   are transfered, ignoring any messages, keep hitting enter
   returned  --> 283 bytes sent in 0.03 seconds (9 Kbytes/s)
   returned  --> mput [name of file being transfered] (y|n|q)?
   keyed in  --> y  [enter]
   returned  --> 200 PORT subcommand request successful.
   returned  --> 150 Sending file to /QDLS/INPRO/xxxxxx
   returned  --> Sent 5334 bytes
   returned  --> 250 File transfer completed successfully.
   returned  --> local: xxxxxxx remote: xxxxxxx
   returned  --> 5334 bytes sent in 0.00 seconds (5 Kbytes/s)
   END:
   returned  --> ftp>
   keyed in  --> quit [enter]
   

iSeries Side

1. CPYFRMPCD FROMFLR(INPRO) TOFILE(QGPL/QREXSRC) FROMDOC(INSTALL) TOMBR(*FROMDOC) (take other default instructions to use *DFT translation table and *TEXT rather than *NOTEXT)
2. STRREXPRC SRCMBR(INSTALL) SRCFILE(QGPL/QREXSRC) PARM(*NONE)

   Except SDN/400 which has a parameter of SDN400, and PFR/400 which skips this step.

   NOTE:Backup the old *EXE and *DB libraries first if this is an upgrade installation. (where * is replaced with product prefix) SDN400 has an extention of *400. Terminate any subsystems you are running for the product also. This step builds the production libraries *EXE and *DB on your system based on the product prefix ie. SPN etc. Other systems covered by your software order will require some or all of these same instructions.

Installation is now complete!